ASAF s.a.s

PLASMA 6000 X 2000 : HPM

2010-08-30 09:21:00

CUTTING PLASMA MACHINE HPM 6000 X 2000 MM USED YEAR 2007 WORKING HOURS NR. 1000.

Technical specification:
- Movement axes X: Mm 6000
- Movement axes Y: Mm 2000

Completed of:
- Source HPR 130 high definition
o Capacity of cutting with perforation untill to 25 mm carbon steel
o Capacity of cutting from metal sheet edge untill to 38 mm carbon steel
o Capacity of cutting with perforation untill to 25 mm Inox steel
o Capacity of cutting from metal sheet edge untill to 25 mm Inox steel

- Aspiration system
- Thread and Pierce Head 6 fusi diameter 22 mm
- Equipment for marching and hammer

PUNCHING MACHINE 20 TON : EUROPE 245

2010-08-25 17:02:15

PUNCHING MACHINE AMADA TYPE EUROPE 245

Technical specification:
- Working power  : Ton 20
- Max thickness of metal sheet: Mm 6
- Max weight of metal sheet : Kg 100
- Working area  : Mm 1000 x 1270
- With automatic ripositioning : Mm 1000 x 2500
- Gap   : Mm 1250
- Max speed movement axes : Mt/min 50
- Stroke    : Mm 32
- Max punching diameter : Mm 88,9
- Power    : kVA 15
- Air    : Lt/min 100
- Net weight  : Kg 10000

Turret configuration:
- N° stations : 19
- Rotation per minute : 30
- Circuit number : 1
- Distance betweeb inferior and superior turret: 20 mm

Configuration:
- stat. A: n. 12 diam. untill a 12.7 mm
B: n. 6 diam. untill a 31.7 mm
C: n. 2 diam. untill a 50.8 mm
D: n. 2 diam. untill a 88.9 mm

- Index from: 1° to 360°

WELDING LASER ROBOT : HL 3006D

2010-08-24 17:43:02

LASER SOURCE TRUMPF TYPE HL 3006D USED

With beam qualità of 25 mrad and 3000 watt in the part, made up of:

- laser with six cavity, max exit-power 3000 watt (1000 watt riserve)

- Feed integrated laser and control

- Integrated water circuit

- heat exchanger water water/filter

- Rapid power control

- Security lock

- Analogic control interface

- Security control for laser Class 1

- Parallel interface SPS (24V I/O)

N° 1 Telediagnose

N° 1 Beam guide made from base plate equipped for n° 4 exit: optical structure for two optical fibre (V100/V100).

N° 1 Diode Laser pilot completed of support and laser control laser pilot by use-software..

N° 2 Optical laser fiber LLK-B 06, 15 m. suitable for robot included device of sicurity fiber, without water tube.

N° 1 Welding optical

- Collimate 0° with capacity sensor

- Lens f=200 mm Achromat

- Protection lens

- Cooling ring for welding optical 0°

- Camera B/N cpl of monitor

Cutting optical:

- Collimate 0° with capacity sensor

- Precitec CFC 30/66 Collimate f=200 mm

- Axes Z speed stroke 30 mm completed of control

- Automatic calibration of distance

- Manual programmation

- Quick change system

- System anti-collision

- Focus optical=150 mm

- Cutting nozzle in HD

N° 1 Cooling system type water/air

N° 1 Robot Motoman for welding and cutting

Pos.1

N° 1 Industrial robot six axes Motoman type UP 50N capacity 50 kg, Brakes on six axes, completed of YASNAC NX100 control con control programation button Touch-screen color display 6,5 LCD a (640 x 680 pixels), sicurity active-man a 3 positions, cable double conector HDC, Standard lenght 9 mt with security dead-man, security module norme EMC

N° 1 Transformer 7,5 KVA

N° 1 Robot cabel-set (n°2 power e n°1 robot signal) of 9 mt

N° 1 Profibus-DP master: card SARCR-XFB01

N° 1 Configurations Software Profibus-DP master Fieldbus konfuretor

N° 1 External control system for 5 axes

Pos.2

N° 1 Set-up kit for robot composed of:

N° 4 cable flat for the connection from cable and sideburn connection, n° 4 sideburn connection

N° 1 Stabilized alimentator of 5°

N° 1 Relè sideburn

N° 1 Kit for the emergency control from/to robotcomposed of n° 1 cable

N° 2 Security modul SCHLEICHER SNO 2004

N° 1 Kit for the installation and control of laser welding system Trumpf

N° 1 Adapter to robot-pulse

N° 1 Control panel gas during the work:

Pos. 3

N° 1 Positioning device Motoman revolve double station VMF-500 S5XL. The table movement is orthogonal between their, coordinated and servo-controlled.

Technical specification:

- Capacity for station kg 500

- Rotable diameter for station mm 1500

- Twisted moment axes X Nm 3000

- Rotation speed axes X da 0 a 5,2 rpm

- Twisted moment axes Y Nm 1840

- Rotation speed in the working station 0 a 7,1 rpm

- Time requested for change station sec. 6

- Predisposition compressed air in the table

- Total weight 3150 kg

N° 3 Engine 2.2 kw

N° 2 Engine 1.3 kw

N° 5 Cable set

Pos. 4

Security protection

Pos. 5

N° 1 Camera system composed of:

- Camera (inside cell) Sony with variable focus

- Monitor Samsung 19 LCD

- Video-cable 25 mt with connector

OLEODINAMIC PRESS BRAKE 2000 X 40 TON - 6 AXES : HS 40/20

2010-08-02 13:55:41

OLEODINAMIC PRESS BRAKE CMP 2000 X 40 TON NEW TYPE HS SINCRONIZZED 6 AXES (Y1-Y2-X-R-Z1-Z2).

Technical specification:

- Power of stroke: Ton 40

- Useful lenght of bending: Mm 2050

- Distance between uprights: Mm 1550

- Gap: Mm 300

- Table distance: Mm 350

- Max stroke adjustable: Mm 170

- Stroke back-gauge axes X: Mm 500

- Stroke back-gauge axes R: Mm 150

- Electrical power: kW 4

- Approach speed : Mm/s 10

- Adjustable working speed: Mm/s 120

- Adjustable return speed: Mm/s 95

- Approx weight: Kg 3600

- CNC: ESAGV 2004 videograf. Color

: CMP BY SC

2010-07-29 10:47:43

OLEODINAMIC SHEAR CMP by SC TYPE Y 2500 X 16 MM

Configuration:

- Principal element electric: SCHNEIDER

- Nr. 2 back security sistem (Autonics)

- Hydraulic Sistem: Valve FIRST

- Hydraulic Elements: NOK made in Giappone

- Blade: 6CrW2Si

- Principal Engine: Made in China

- Control: E10

OLEODINAMIC PRESS BRAKE CMP BY SC : CMP BY SC

2010-07-29 10:25:24

OLEODINAMIC PRESS BRAKE CMP by SC SINCRONIZED 4 AXES (Y1-Y2-X-R) CONTROL CNC CYBELEC DNC600S - STANDARD TOOLS OLEODINAMIC BOMBERING WITH CNC

PRESS BRAKE 2000 X 35 TON : 35/20

2010-07-26 16:28:11

PRESSA PIEGATRICE OLEODINAMICA SCHIAVI 2000 x 35 TON MOD. RG 35-20 USATA CONTROLLO 2 ASSI EMS PS402.

Power stroke	Ton 35
Table lenght	Mm 2000
Max bending lenght	Mm 2000
Distances between uprights	Mm 1695
Gap	Mm 200
Lenght	Mm 2350
Width	Mm 1400
Height	Mm 2000

PRESS BRAKE 1200 X 25 TON : 25/12

2010-07-26 16:07:04

OLEODINAMIC PRESS BRAKE SCHIAVI 1200 x 25 TON TYPE RG 25-12 USED CONTROL 2 AXES EMS PS402.

Power stroke	Ton 25
Table lenght	Mm 1200
Max bending lenght	Mm 1200
Distances between uprights	Mm 1015
Gap	Mm 200
Lenght	Mm 1800
Width	Mm 1350
Height	Mm 1750

CUTTING LASER MACHINE 2000 X 4000 - WATT 4000 : TC L3040

2010-07-23 10:04:20

CUTTING LASER MACHINE TRUMPF TYPE TC L3040 - TLF 4000 - USED YEAR END OF 2007.

Movement Asse X	Mm 4000
Movement Asse Y	Mm 2000
Movement Asse Z	Mm 115
Max. Speed Asse X	M/Min 60
Max. Speed Max. Asse Y	M/Min 60
Max. Speed Simult. X-Y	M/Min 85
Numeric Control	Siemens Sinumerik 840D
Laser Power	Watt 4000
Max Thikness Of Cutting: Fe	Mm 20
Max. Weight Of Material	Kg 1250
Precision Min.	Mm 0,001
Consumption Gas Laser Co2	L/H 1
Consumption Gas Laser N2	L/H 6
Consumption Gas Laser He	L/H 13
Consumption Eletctr. Approx.	Kw 32-65
Weight	Kg 16000
Color	Bianco Blue
Dimension Approx.	Mm 11600X5200X2000 H

Standard Configuration:

- Closed Machine Frame With Integrated Laser Unit

- Automatic Pallet Changer And Longitudinal Conveyor

- Drives: Maintaenance-Free 3-Phase Servo Motors

- Working Are Light

- Automatic Shut Down

- Quick Changing Cutting Head With 5" Lens

- Additional Cutting Head With 7,5" Lens

- Additional Cutting Head With 3,75" Lens

- Logbook Function

- Sprint - Las

- Contour Las

- Light Barriers: Multi-Beam Safety Light Barriers, Completly Encapsulated And Purged Beam Delivery, Monitoring System,

- Safety Cabin

PUNCHING MACHINE SG6 YEAR 2007 : SG6

2010-07-01 09:15:04

HYDRAULIC PUNCHING MACHINE CNC FINN POWER TYPE SHEAR GENIUS SG6 USED YEAR 2007 WORKING HOURS NR. 1500.

Technical specification:

- Punching-Power 30 Ton
- Working area mm 3000x1500
- Angle shear integrated RS 1500
- Adjustable blades Lame ACS
- System of load LD6 with 1 load station
- Traubleshooter double metal sheet
- System for to true up the metal sheet
- Hydraulic system with punch-stroke completely programmable
- Turret with 20 Stations
- N°10 Fix stations
- N°6 Station auto-index
- N°02 Multi-tool
- N°02 Deformation station
- Brush table and supply table for max dimension of metal sheet
- N°03 Clamps
- Atomatic programmation of clamps PCS
- Numeric Control Siemens Sinumerik 840 D
- Conveyor parts
- Software for manage Multi-tool Rotanti Wilson Tool
- Centralized lubrication

CUTTING LASER 3000 X 1500 MM - WATT 2200 : 3015

2010-06-22 14:48:37

CUTTING LASER MACHINE BYSTRONIC TYPE BYSPRINT 3015 USED YEAR 2005.

Working area	Mm 3000 x 1500
Movement Axes Z	Mm 1500
Tolerance of repeatability	+/- Mm 0,05
Max. speed of simultaneous positioning X/Y	M/Min 169
Capacity of the table	Kg 880
Laser Power	Watt 2200
Wavelength	µm 10.6
Polarization	Circolare
Consumption of gas for laser (minimum value) - Helium (Purity min.: 99.996%) - Nitrogen (Purity min.: 99.999%) - Carbon dioxide (Purity min.: 99.995%)	ca. 36 Nl/h ca. 19 Nl/h ca. 1.3Nl/h
Max. absorption	kVA 54
Color	Red, blue-violet, light grey chiaro, dark grey

Eqiupment:

- Safe security;

- System of aspiration;

- Automatic canche pallet;

- N° 1 Cutting head of 5;

- N° 1 Cutting head of 7,5

- Beam on 12000

- Laser on 27000

: TC 600L

2010-06-22 14:34:17

COMBINATION PUNCHING LASER MACHINE TRUMPF TRUMATIC TYPE TC 600 L-1600 FMC- AXES X MM 3000 - AXES Y MM 1500 - LASER POWER W 2200 - YEAR 1996 SHEETMASTER - TRUMASORT L2 NEW RESONATOR YEAR 2007.

Movement Axes X	Mm 3000
Movement Axes Y	Mm 1500
X Speed Max.	M/Min 90
Y Speed Max.	M/Min 60
Speed Max	M/Min 108
Number Of Strokes	1/Min 600
Numeric Control	Siemens Sinumerik 840d
Laser Power	Watt 1500
Punch Diam. Max	Mm 76,2
Plate Thickness Max.	Mm 8
Tools Automatic Changing	Stk 19
Punch Power Max.	Kn 220
Color	Bianca Blu
Weight	Kg 16700
Pneumatic Power	Nm3/H
Electrical Power	Kva 65
Dimension	Mm 8100 X 7500 X 2400 H

Standard configuration:

- Stable C-frame

- Coordinate guide with integrated linear magazine, 19 tool stations, 2 clamps

- Drives: Maintenance-free, three-phase servo motors

- Programmable presser foot for repositioning

- Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute

- 2 parts containers

- Automatic shutdown

- Nitroline

- Marking

- Tapping

- Multitool

- Softpunch

- HI-LAS high pressure cutting

- ContourLas for producing small holes

- Punching head: Hydraulic single tool adapter, 360° rotation of all tools, automatic tool length compensation, spray tool lubrication, 2nd lubricant container, vacuum slug removal, swarf bucket

- Sinumerik 840D control: Open PC-based control system, easy to use, Online help, diagnostic functions, maintenance logbook, technology data, Teleservice, 3.5" disk drive, BNC/RJ45 connection

BENDING MACHINE 3R - 3100 X 35/45 MM : EMO 31-40

2010-06-22 14:17:49

3 ROLL PLATE BENDING MACHINE WITH PREBENDING SERTOM TYPE EMO 31-40- YEAR 2001 WITH CE.

With the following features:

- Working lenght: 3100 mm

- Top roll diameter: 570 mm

- Side rolls diameter: 500 mm

- Max bending thickness: 35/45 mm.

- Max pre-bending thickness: 56/60 mm.

- Power: 65 hp

- Weight approx.: 36.000 kg.

- Dimensions approx: 700x290x235h (cm)

PUNCHING MACHINE 2550 X 1280 - 18 TON : TC 3000R-1300 SM

2010-06-15 15:35:33

PUNCHING MACHINE TRUMPF TYPE TC 3000R-1300 USED YEAR 2003 WITH SYSTEM OF LOAD UNLOAD SHEETMASTER.

Movement Axes X	Mm 2550
Movement Axes Y	Mm 1280
Punching Force	Ton 18
Max Positioning Speed Axes X	M/Min 90
Max Positioning Speed Axes Y	M/Min 60
Max Positioning Speed Simultaneous	M/Min 108
Automatic Tool Changer	Stk 19
Number Of Stroke	1/Min 900
Control	Bosch Trumagraph Cc 220s
Max. Sheet Thickness	Mm 6,4
Max. Tool Diameter	Mm 76,2
Weight	Kg 8000
Color	Bianco Blue
Dimension Approx. Lenght Width	Mm 15000 Mm 7000

Equipment:

- Solid C-frame

- Coordinate guide with integrated linear magazine with 21 places for tools and clamps

- 2 clamps

- Drives: maintenance-free, digital three-phase AC servo motors

- Punching head: hydraulic system with closed feedback loopservo loop, hydraulic mono-tool holder, 360 ° rotation for

all tools, automatic tool length compensation, programmable wiper-movement

- Programmable foot stripper

- Spray tool lubrication

- Punching slugs suction system

- Chip box

- Part chute 500 x 500 mm

- Control: BOSCH PNC-P, activity oriented operating environmentuser interface, on-line help, diagnostic function,

3,5"-floppy disk drive, RJ45- network connection

- Network connectivity by installing via Teleservice

- Safety: CE-marking, light barriers, quick switch-off hydraulic

- Color: white RAL 9002 / blue RAL 5010

Additional Options:

- Multitool-control

- Tapping

- Engraving / quick beading

- Multishear

- Multibend

- Roll Technology

- Softpunch

- Stencil spray lubrication

- One additional clamping bracket

- Vertically movable clamping claw

- Repositioning cylinderrepositioning device

- Sensor for parts slide

- Cushioning against vibration

- Automatic Shutdown

- Scratch arms handling

- Bulge detection

Automation Components:

- SheetMaster 1303

- Loading station with sheet separators

- Unloading platform

- Sheet metal thickness gauge to double sheet control

- Control TASC 100

- Peeling system

- Block sucker plate

- TRUMAGRIP residual lattice disposal unit

CUTTING LASER MACHINE 3000 X 1500 - WATT 1500 : TC L3030

2010-06-11 17:01:01

CUTTING LASER MACHINE TRUMPF TYPE TC L3030 TLF 1500 - USED YEAR 1995 WITH ROTOLASS FOR CUTTING TUBE.

Movement asse x	Mm 3000
Movement asse y	Mm 1500
Movement asse z	Mm 115
Max. speed asse x	M/min 60
Max. speed max. asse y	M/min 60
Max. speed simult. x-y	M/min 84
Numeric control	Bosch trumagraph cc 220s
Laser power	Watt 1500
Max thikness of cutting: fe	Mm 12
Max. weight of material	Kg 710
Precision min. programable stroke	Mm 0,01
Consumption gas laser co2	L/h 1
Consumption gas laser n2	L/h 5
Consumption gas laser he	L/h 14
Consumption eletctr. approx.	Kw 20-45
Weight	Kg 11500
Color	Bianco blue
Dimension approx.	Mm 9800 x 4600 x 2000 h

Standard configuration:

- closed machine frame with integrated laser unit

- automatic pallet changer and longitudinal conveyor

- drives: maintaenance-free 3-phase servo motors

- working are light

- quick changing cutting head with 5" lens

- additional cutting head with 7,5" lens

- oil spray device for reliable thick plate machining

- logbook function

- light barriers: multi-beam safety light barriers, completly encapsulated and purged beam delivery, monitoring system,

- safety cabin

OLEODINAMIC PRESS BRAKE 3000 X 100 TON : 100/30

2010-06-08 18:05:26

OLEODINAMIC BEYLER 3000 X 100 TON USED YEAR 2001 WITH CE CNC 7 AXES (Y1 - Y2 X1 X2 - R - Z1- Z2) OLEODINAMIC BOMBERING N° 2 FRONT SUPPLY.

Bending useful lenght	Mm 3000
Max pressure	Ton 100
Max stroke	Mm 415
Max distances between tables	Mm 604
Approach speed	Mm/s 200

OLEODINAMIC PRESS BRAKE 3000 X 100 TON : 100/30

2010-06-08 18:00:56

OLEODINAMIC PRESS BRAKE BEYLER 3000 X 100 TON USED YEAR 2001 WITH CE CNC 7 AXES (Y1 - Y2 X1 X2 - R - Z1- Z2)BOMBERING OLEODINAMIC N° 2 FRONT SUPPLY

Bending useful lenght	Mm 3000
Max pressure	Ton 100
Max stroke	Mm 415
Max distances between tables	Mm 604
Approach speed	Mm/s 200

OLEODINAMIC PRESS BRAKE 3000 X 130 TON : HFP 130/3

2010-05-25 17:52:03

OLEODINAMIC PRESS BRAKE AMADA TYPE HFP 130/3 USED YEAR 2005 SINCRONIZED 7 AXES (Y1Y2X1X2RZ1Z2) CE.

Technical specifications:

- Lenght of bending: Mm 3140

- Pressare max: Ton 130

- Distance between lenght: Mm 2700

- Cnc AMNC NT Grafico 2D/3D

- Weight of machine: Kg 8200

- Electrical power (400 V / 50-60 Hz): kVA 12,5

- Quantity hydraulic oil: Lt 150

:

2010-05-25 17:10:52

PUNCHING MACHINE TRUMPF TYPE TC 1000R - AXES X MM 2070 AXES Y MM 1280

USED YEAR 2007

Movement Axes X	Mm 2070
Movement Axes Y	Mm 1280
Punching Force	Ton 16,5
Automatic Tool Changer	Stk 15
Number Of Stroke	1/Min 600
Control	Bosch
Max. Sheet Thickness	Mm 6,4
Color	White Blue

Configuration:

- Safe Security

- Automatic Tool Changing N° 15

CUTTING LASER MACHINE 4000 X 1500 - WATT 2500 : L1 4015

2010-05-06 18:14:45

CUTTING LASER MACHINE SALVAGNINI TYPE L1 USED YEAR 2002

Technical specification:

- Movement axis X: Mm 4000

- Movement axis Y: Mm 1500

- Laser Source: ROFIN

- Laser Power: Watt2500

Equipments:

- Safe security system

- Cutting Head of 5 and 7,5

- Automatic change pallet

- Aspiration system

- Chiller

- Conveyor

- Automatic loadind and unloading system